Why Load Decides What an Electrical Thermogram Means

2026-11-21T01:58:41+00:0021 November 2026|Electrical Thermal Imaging Category, Featured, Mechanical Condition Monitoring|

A thermal image of a distribution board shows where it is warm, but not why. A busy circuit and a failing connection can look much the same unless the load at the time of the image is known. This post explains how load is established board by board during a survey, how it changes the confidence of each finding, and why the heating season is often a good time to book a thermographic survey of your boards.

Thermography in Electrical and Mechanical Installations

2026-11-21T01:58:54+00:0014 January 2025|Electrical Thermal Imaging Category, Featured|

Electrical and mechanical plant rarely fails without warning: a loose connection, a dry bearing or a misaligned coupling gives off heat long before anything trips or seizes. This post explains how thermography reads a working installation safely, without contact, with the plant still running, what it looks for on each side, and why telling a real fault from a busy circuit or a reflection is the work of Level 3 analysis, not of the colour palette.

Go to Top